How to measure for Buckaroo Casual/Uniform Belt

How to accurately measure yourself for a:
  • Buckaroo (KSB32/38) Ken’s Special Belt
  • (WB50) Workers Belt
  • (VEL32) Velcro Belt.

Buckaroo sizing is original and tailored to our own designs. Please be sure to measure yourself accordingly to guarantee a comfortable, yet flexible fit.

Step 1

You will take a measurement around your preferred wearing position, where your casual belt will sit. This could be your waist, or hips, depending on how you prefer to wear your casual/dresser belts (high waist/low waist). Wrap the tape measure or seamstress tape around the body, keeping the tape on a horizontal plane and overlap it at the front. To take the most accurate measurement you need to be relaxed. Standing upright, take in a full breath and exhale, pinch the tape together and take your measurement where the tape meets at the front.

In millimetres or inches (“), match your measurement to the size chart below.

When looking at the chart given, NOTCH 1 represents the first hole (smallest), and NOTCH 5 represents the final hole (largest) option on your belt. You should aim for a belt where your measurement lands closest to, or around the middle notch. This way you’ve landed in a comfortable yet flexible fit.

Alternatively, if you don't have a seamstress tape or flexible tape measure – No Problem. You can use any string, thread or cord, thread through the belt loops, mark the spot where it goes all around your waist or hip exactly one time, and then measure this distance with a regular tape measure.

You can also get your belt size with your current belt simply using a measuring tape to measure the length from the inner end of the buckle to the hole which fits you most comfortably - it will likely be the spot to show the most wear and tear. Buckaroo uniform belts refer to centre notch (hole) for size. Our Buckaroo leather uniform belt has 5 notches total.

Please ask as many questions as you need, and we will assist you. You can contact us via customer service at info@buckarooleather.com.au. Alternatively you can call through to our factory during office hours and we can assist. +61 (02) 4225 9333

Note:

1 - WB50 is 50mm thick and is generally worn on top of pants and not threaded through belt loops.